Fedora → Из дневника. Путь к установке Joomla.
Просто мой путь в RFR-13 к установочной страничке Joomla,
и ничего более. (Оказалось полезным, потому слегка подправил уже на RFR-14 04.02.2011г.)
"«Теплый ламповый центос». =D Джумла тут особо не при чем, кроме пары последних строчек…",- определение Procion
Инициализируется база данных MySQL: Installing MySQL system tables…
OK
Filling help tables…
OK
To start mysqld at boot time you have to copy
support-files/mysql.server to the right place for your system
PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER!
To do so, start the server, then issue the following commands:
/usr/bin/mysqladmin -u root password 'new-password'
/usr/bin/mysqladmin -u root -h konstantinjch password 'new-password'
Alternatively you can run:
/usr/bin/mysql_secure_installation
which will also give you the option of removing the test
databases and anonymous user created by default. This is
strongly recommended for production servers.
See the manual for more instructions.
You can start the MySQL daemon with:
cd /usr; /usr/bin/mysqld_safe &
You can test the MySQL daemon with mysql-test-run.pl
cd /usr/mysql-test; perl mysql-test-run.pl
Please report any problems with the /usr/bin/mysqlbug script!
[ OK ]
Запускается mysqld: [ OK ]
— После запуска следующей команды нужно внимательно ответить на вопросы:
NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MySQL
SERVERS IN PRODUCTION USE! PLEASE READ EACH STEP CAREFULLY!
In order to log into MySQL to secure it, we'll need the current
password for the root user. If you've just installed MySQL, and
you haven't set the root password yet, the password will be blank,
so you should just press enter here.
Enter current password for root (enter for none): < — ENTER
OK, successfully used password, moving on…
Setting the root password ensures that nobody can log into the MySQL
root user without the proper authorisation.
Set root password? [Y/n] <--ENTER
New password: < — ввод_пароля
Re-enter new password: < — ввод_пароля
Password updated successfully!
Reloading privilege tables…
… Success!
By default, a MySQL installation has an anonymous user, allowing anyone
to log into MySQL without having to have a user account created for
them. This is intended only for testing, and to make the installation
go a bit smoother. You should remove them before moving into a
production environment.
Remove anonymous users? [Y/n] < — ENTER
… Success!
Normally, root should only be allowed to connect from 'localhost'. This
ensures that someone cannot guess at the root password from the network.
Disallow root login remotely? [Y/n] < — ENTER
… Success!
By default, MySQL comes with a database named 'test' that anyone can
access. This is also intended only for testing, and should be removed
before moving into a production environment.
Remove test database and access to it? [Y/n] < — ENTER
— Dropping test database…
… Success!
— Removing privileges on test database…
… Success!
Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.
Reload privilege tables now? [Y/n] < — ENTER
… Success!
Cleaning up…
All done! If you've completed all of the above steps, your MySQL
installation should now be secure.
Thanks for using MySQL!
—
Если в строку браузера ввести:localhost/
то должно быть:
Если в строку браузера ввести:localhost
то должно быть:
Привожу вид phpMyAdmin.conf после правки:
Далее:
Если в строку браузера ввести: localhost/phpmyadmin/
в появившемся окне ввести 'root' и 'пароль' базы данных (не системы!)
то должно быть:
Затем Joomla:
Идём на сайт
Копируем ссылку для комманды wget:
(Вы можете сделать свой выбор, я сделал так)
Если в строку браузера ввести: localhost/installation/index.php
то должно быть:
Вот и все. Дальше начало другого акта. Вам будет необходимо выполнить ещё один дополнительный шаг
в конце установки — загрузить код вручную.
Скопируйте в этот пустой, вновь созданный файл предложенный код.
И не забудьте:
Нажмите кнопку админ и Вы увидите:
Хочется сказать спасибо за помощь fedora@conference.jabber.ru.
и ничего более. (Оказалось полезным, потому слегка подправил уже на RFR-14 04.02.2011г.)
"«Теплый ламповый центос». =D Джумла тут особо не при чем, кроме пары последних строчек…",- определение Procion
[konstantinjch@konstantinjch ~]$ su -
Пароль:
# yum install mysql mysql-server; chkconfig --levels 235 mysqld on; service mysqld startИнициализируется база данных MySQL: Installing MySQL system tables…
OK
Filling help tables…
OK
To start mysqld at boot time you have to copy
support-files/mysql.server to the right place for your system
PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER!
To do so, start the server, then issue the following commands:
/usr/bin/mysqladmin -u root password 'new-password'
/usr/bin/mysqladmin -u root -h konstantinjch password 'new-password'
Alternatively you can run:
/usr/bin/mysql_secure_installation
which will also give you the option of removing the test
databases and anonymous user created by default. This is
strongly recommended for production servers.
See the manual for more instructions.
You can start the MySQL daemon with:
cd /usr; /usr/bin/mysqld_safe &
You can test the MySQL daemon with mysql-test-run.pl
cd /usr/mysql-test; perl mysql-test-run.pl
Please report any problems with the /usr/bin/mysqlbug script!
[ OK ]
Запускается mysqld: [ OK ]
— После запуска следующей команды нужно внимательно ответить на вопросы:
# mysql_secure_installationNOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MySQL
SERVERS IN PRODUCTION USE! PLEASE READ EACH STEP CAREFULLY!
In order to log into MySQL to secure it, we'll need the current
password for the root user. If you've just installed MySQL, and
you haven't set the root password yet, the password will be blank,
so you should just press enter here.
Enter current password for root (enter for none): < — ENTER
OK, successfully used password, moving on…
Setting the root password ensures that nobody can log into the MySQL
root user without the proper authorisation.
Set root password? [Y/n] <--ENTER
New password: < — ввод_пароля
Re-enter new password: < — ввод_пароля
Password updated successfully!
Reloading privilege tables…
… Success!
By default, a MySQL installation has an anonymous user, allowing anyone
to log into MySQL without having to have a user account created for
them. This is intended only for testing, and to make the installation
go a bit smoother. You should remove them before moving into a
production environment.
Remove anonymous users? [Y/n] < — ENTER
… Success!
Normally, root should only be allowed to connect from 'localhost'. This
ensures that someone cannot guess at the root password from the network.
Disallow root login remotely? [Y/n] < — ENTER
… Success!
By default, MySQL comes with a database named 'test' that anyone can
access. This is also intended only for testing, and should be removed
before moving into a production environment.
Remove test database and access to it? [Y/n] < — ENTER
— Dropping test database…
… Success!
— Removing privileges on test database…
… Success!
Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.
Reload privilege tables now? [Y/n] < — ENTER
… Success!
Cleaning up…
All done! If you've completed all of the above steps, your MySQL
installation should now be secure.
Thanks for using MySQL!
—
# yum install httpd; chkconfig --levels 235 httpd on; service httpd startЕсли в строку браузера ввести:localhost/
то должно быть:
# yum install php; service httpd restart; echo -e "<?php\nphpinfo();\n?>">/var/www/html/index.php; service httpd restart
Если в строку браузера ввести:localhost
то должно быть:
# yum install php phpmyadmin php-devel php-gd php-imap php-ldap php-mysql php-odbc php-pear php-xml php-xmlrpc php-eaccelerator php-magickwand php-magpierss php-mapserver php-mbstring php-mcrypt php-mhash php-mssql php-shout php-snmp php-soap php-tidy curl curl-devel perl-libwww-perl ImageMagick libxml2 libxml2-devel
# gedit '/etc/httpd/conf.d/phpMyAdmin.conf'Привожу вид phpMyAdmin.conf после правки:
# phpMyAdmin - Web based MySQL browser written in php
#
# Allows only localhost by default
#
# But allowing phpMyAdmin to anyone other than localhost should be considered
# dangerous unless properly secured by SSL
Alias /phpMyAdmin /usr/share/phpMyAdmin
Alias /phpmyadmin /usr/share/phpMyAdmin
#<Directory /usr/share/phpMyAdmin/>
# order deny,allow
# deny from all
# allow from 127.0.0.1
# allow from ::1
#</Directory>
# This directory does not require access over HTTP - taken from the original
# phpMyAdmin upstream tarball
#
<Directory /usr/share/phpMyAdmin/libraries>
Order Deny,Allow
Deny from All
Allow from None
</Directory>
# This configuration prevents mod_security at phpMyAdmin directories from
# filtering SQL etc. This may break your mod_security implementation.
#
#<IfModule mod_security.c>
# <Directory /usr/share/phpMyAdmin>
# SecRuleInheritance Off
# </Directory>
#</IfModule>
Далее:
# service httpd restart
Если в строку браузера ввести: localhost/phpmyadmin/
в появившемся окне ввести 'root' и 'пароль' базы данных (не системы!)
то должно быть:
Затем Joomla:
Идём на сайт
Копируем ссылку для комманды wget:
(Вы можете сделать свой выбор, я сделал так)
# cd /var/www/html/; rm -f index.php; wget http://joomlaportal.ru/downloads/joomla/Joomla_1.5.22-Stable-Full_Package-Russian.tar.gz
# gunzip *.gz; tar -xvf *.tar; rm -f *.tar; chmod -Rc 755 /var/www/html/; service httpd restart
Если в строку браузера ввести: localhost/installation/index.php
то должно быть:
Вот и все. Дальше начало другого акта. Вам будет необходимо выполнить ещё один дополнительный шаг
в конце установки — загрузить код вручную.
# gedit 'configuration.php'Скопируйте в этот пустой, вновь созданный файл предложенный код.
И не забудьте:
# rm -rf installation
# exitНажмите кнопку админ и Вы увидите:
Хочется сказать спасибо за помощь fedora@conference.jabber.ru.
- +7
- konstantinjch
- 30 июня 2010, 16:25
Больше подходит, конечно, для , но выбор блога — право автора. :-)
Джумла тут особо не при чем, кроме пары последних строчек…